Why do corn processing machines experience jams?

发布时间：2026-03-30 点击次数：

Strictly speaking, if a fault occurs in maize processing equipment during production, it will directly affect the quality of the finished product, regardless of the severity of the fault. Therefore, operators must exercise particular care whilst the equipment is in operation. On occasion, maize processing equipment may experience jamming; what causes this?

Generally, jamming in maize processing equipment is caused by impurities blocking the pipes, preventing normal flow. This results in material upstream being unable to enter and material downstream being unable to exit, leading to a production stoppage. Poor-quality impurities are prone to blocking conveyor pipes, hindering smooth production and obstructing the feeding system of the maize processing equipment. This leads to uneven feeding, reduced feed volume, and a decrease in the equipment’s process efficiency and processing capacity.

Poor-quality impurities are prone to blocking conveyor pipes, hindering smooth production and obstructing the feeding system of the maize processing equipment. This leads to uneven feeding, reduced feed volume, and a decrease in the equipment’s process efficiency and processing capacity.

　　It may also be due to an electrical fault. A motor with a power rating of 3,000 watts has a rated current of 6 amps. If the motor is operating under overload, check the mechanical load; if overloaded, a higher-power motor must be fitted. If problems arise during the operation of the maize processing equipment, do not panic. Identify the cause of the fault from the possible causes, select a reasonable method for repair, and respond calmly.