Why stone mill flour mill vibrating screen mesh will be broken in a straight line

发布时间：2024-09-11 点击次数：

Vibrating screen is a relatively common screening equipment in the stone mill flour mill, and the use of it is also relatively convenient and hassle-free. But some times, 

the staff in the stone mill flour mill operation, will find that the vibrating screen mesh will appear straight line fracture phenomenon, affecting the screening effect, 

so what is the reason for this?

　　(1) The vibrating screen mesh standard is too long, which constitutes the tensioning screws are not tight;

　　(2) There is a problem with the tensioning arrangement of the vibrating screen machine, the tensioning plate is not matched with the screen machine, 

and the tensioning plate is worn thin or deformed;

　　(3) The shape and standard of the curved edge of the screen mesh of the vibrating screen is not matched with the tensioning plate;

　　(4) The vibrating screen sieve body welding cracking caused by the sieve body planning damage, or the rubber gasket strip is worn out or there is empty space;

　　5) The vibrating screen sieve box support bar is lower than the screen, that is, the support bar and the screen have a certain interval;

　　(6) The rigidity of the four springs of the vibrating screen machine is not uniform, and the amplitude is too large.

　　From the above can also be seen, if the staff if you can timely view the specifics of each configuration of the stone mill flour mill, timely adjustment of the 

corresponding parameters, will effectively reduce the frequency of failures, improve the quality of processed products, to protect the manufacturer's revenue.