Stone milling flour machinery installation and debugging precautions

发布时间：2024-09-04 点击次数：

Many users in the procurement of small stone grinding flour machinery in order to reduce some costs, so choose to carry out the daily installation and commissioning of equipment, but often installed equipment will always have some problems, today I summarised some of the small stone grinding flour machinery installation and commissioning of the notes for your reference.

　　1, the machine can be installed on the ground, can also be suspended in the air, around the adjustment, maintenance space should be left, the installation should be calibrated.

　　2、Check whether the bolts of each part are loose and whether the blades have rubbed the shell.

　　3、Check the transmission part for any obstruction or looseness.

　　4、Check whether the wire is balanced.

　　5、Check whether there are foreign objects falling into the shell.

　　6、Be sure to carry out air running before starting the machine, and feed the material only if there is no strange sound.

　　7、After normal operation, adjust the flow of material correctly, the flow is too large, it will cause the material to pile up and not achieve the conveying effect.

　　8、When the machine is running, it is strictly prohibited to put hands and other objects into the machine.