Measures to deal with mouldy maize

发布时间：2024-08-16 点击次数：

　Corn should be stacked on high, well-ventilated, dry ground whenever possible. It is important to watch the temperature change of the grain pile, the lower the grain temperature, the better. You can take methods such as shelving, yard trips and turning and mashing on time to avoid further mouldy grains. If the grain has signs of mould, you can also take the following measures, emergency treatment, to save unnecessary economic losses.

　　1, salt treatment method mixing l kg of salt per 500 kg of grain mixing ratio, and then thinly spread the grain on the ground, turning more than two times a day, to dehumidification and heat dissipation. This method can keep 10 days without germination mould.

　　2, bleach sealing method per 500 kg of damp grain mixed with l kg of bleach proportion of mixing, piled into a conical shape, with film sealing grain pile, can keep 8 days to 10 days of grain is not bad.

　　3, hygroscopic treatment method will be hygroscopic substances into small bags, according to l0% ~ 20% of the dosage of uniformly piled into the pile of damp grain, adsorption of moisture on the surface of wet grain. This method is mainly applicable to a small amount of damp grain or seed grain processing.

　　4, film sealing method will be damp grain to remove the mixed pile up, each pile can be: 250-1500 kg, covered with film sealing, can ensure that the damp grain within 7 days without germination and heat. If you want to maintain good grain quality, the treatment period is very good not more than 5 days. Damp grain in the treatment period meets the good weather, should be timely sun drying.