Does raw corn grain affect corn processing equipment?

发布时间：2024-07-12 点击次数：

The grinding part of the corn processing equipment relies on the pressure exerted by the outside world to break, small particles can not be contacted will not be subjected to the grinding effect, want to get uniform flour, either repeat the grinding operation, or screen out. Rolling distance to reduce the length of the grinding area will increase, the degree of material crushed to improve, but the corn processing equipment unit flow rate is correspondingly reduced.

There are steps in corn processing that control the moisture content in corn flour. Fresh corn moisture content is too high, it will hinder the corn peeling process, reduce the taste of the flour made, grinding flour is not dry enough, preservation is also a certain degree of difficulty, a little time will occur mould and other problems. Therefore, in the flour processing, corn processing equipment for corn is a certain selection requirements.

In the production of corn processing equipment, the quality of the original grain requirements is very important. For example, for the powder and gelatinous corn, it is important to note that the type of corn to be used for them should be different. In addition, it is important to maintain the right amount of broken kernels in the raw maize grain, which will help to process it better in the following stages. It is important that the raw maize grain must be pure, generally the less impurity content of the maize raw material, the more suitable for processing.