What are the types of flour mill circular sieves?

发布时间：2024-05-22 点击次数：

In the wheat flour mill sieving equipment, the round sieve is a relatively common sieving equipment, but many people do not know much about the structure of the round sieve, type and so on, so in the production process also caused a lot of problems. Therefore, today I will introduce you to the type of wheat flour mill round sieve, so that you can understand. 

　　In fact, the round sieve of wheat flour mill can be divided into two types: vertical vibrating round sieve and horizontal vibrating round sieve. The vibrating circular sieve of the flour milling machine is a device used to deal with the viscous suction powder and bran beating powder. We need to choose the right circular sieve according to the specific situation when choosing.

　　 The main component of the vertical vibrating circular sieve of wheat flour mill is the sieve body hanging on the frame. Sieve body in the middle of a beating plate rotor, the outside is a round sieve cylinder, the rotor spindle side is equipped with a bias block, so that the sieve body produces a small amplitude of high-frequency vibration. The beating plate rotor circumferential distribution of four bar-shaped beating plate, beating plate backward tilt angle, installed on the top of a number of upward tilted blades, blades spaced out in a spiral shape. The material enters into the sieve cylinder from the lower inlet, and is thrown to the inner surface of the sieve cylinder under the action of the beating plate, and the fine particles pass through the sieve holes, and are discharged from the lower outlet, and the material in the cylinder is gradually pushed to the upper outlet, and the sieve cylinder uses nylon as the sieve mesh.

　　Vertical vibrating circular sieve for wheat flour mill is generally used in the way of feeding from above and discharging from below, the sieve cylinder is installed on the vibration absorber, and then fixed to the bottom plate, the motor drives the spindle to rotate, and the inertia force generated by the bias block on the spindle makes the sieve body vibrate.