Grinding of maize milling machine equipment

发布时间：2024-01-03 点击次数：

Corn milling machine equipment in the technical characteristics of the grinding roller to match the powder road, short powder road is appropriate to use a dense number of teeth, the slope of the grinding roller, such as the use of a thin number of teeth, the slope of the grinding roller, will cause a reduction in the powder rate. In order to keep the corn milling machine equipment powder rate, it is inevitable to tighten the rolling distance, but also cause the wheat husk broken, deteriorating the quality of corn. The long powder road applies the thin teeth number and small slope of the grinding roller to reduce the breakage of bran flakes and reduce the ash content of corn.  

　　Conventional corn mill equipment operating conditions and wind network debugging is completed, you can carry out feeding experiments. Initial feeding should be carried out according to 50% of the design output, when the flow rate is balanced and gradually increase the output, through the adjustment of the mill rolling distance to make the powder rate in line with the process regulations: through the observation of the mill grinding to analyse the technical characteristics of the mill rollers is appropriate; according to the sieving of the material after the diversion of the flow to determine the appropriateness of the configuration of the powder sieve. When the output is mentioned in the design output, the comprehensive equipment operating conditions, material changes, the flow rate of each road, and various data to analyse the operation of the unit.

　　A set of corn milling machine equipment in the operation process can be completely said to be interlocked, step by step, pulling one hair to move the whole body, a component can decide everything. So in the daily production process must pay attention to each component, each equipment operating conditions, how to make each component to achieve good operating results, is an effective corn processing equipment.