Methods of removing powder accumulation in the cleaner

发布时间：2023-12-25 点击次数：

In the process of processing flour in the corn milling machinery, it is necessary to clear the flour machine to clean up the initial processing of flour. Next Henan established grain and oil machinery to introduce the corn milling machinery clearing machine accumulation of powder removal methods:

　　1, should always clean the inside and outside of the air chamber of the flour milling machine on both sides, the feed device of the organic glass observation window, the period to maintain good light transmission, easy to observe the operating conditions of the material. Gas chamber inside the observation window is usually not easy to clean up, it is recommended that at least once a week to clean up, otherwise it will affect the light of fluorescent lamps in the machine, which is not conducive to the observation of the movement of materials.

　　2, the cleaning of the inside of the feeding device. Clear powder machine in the process of use, the feeding device will inevitably adhere to the internal and deposition of some dust, it is recommended to clean up once a week or two axes.

　　3, cleaning powder machine suction duct cleaning. When the corn milling machinery suction airway only a small amount of dust deposits, can be opened through the large make-up air valve for rapid clean-up, clean-up should be immediately after the make-up air valve to the appropriate position, than to ensure that the sieve surface material suction air volume. If the dust deposition is serious, open the big make-up air valve is not helpful, should be cleaned up manually. Dust deposits serious reason is to make up the wind valve improperly adjusted, and a longer period of time is not timely clean up caused by the dust should be frequently observed, clean up at any time, adjusted to maintain the appropriate amount of air intake.