Technical conditions to be met for discharge and feeding

发布时间：2023-12-18 点击次数：

Corn mill flour machinery discharge hopper is under negative pressure during production due to the pneumatic suction transport pipe sucking material directly at the hopper outlet. The main air from the lower edge of the upper mill door into the machine and then into the guide trough, with the fast roller forward air is suppressed by the narrow slit of the air gap suppression and then the left end of the sliding arc cover escapes into the feed chamber and the main air mix. The main air of the corn mill flour machinery pushes the feed forward, and is sucked away from the feed on the top of the rolling pitch, and enters the suction pipe through the deflector plate on the top of the slow rollers, and there is a sealing member at the junction with the slow rollers.

　　The other part of the air from the feed room west mouth into the suction mouth size with the adjustment of the valve, to the slow roller and the main air into the suction pipe convergence. The size of the suction pipe is adjusted by the regulating valve, and the air and the material under the mill are mixed into the pneumatic suction transport pipe. Corn mill flour machinery in the heart mill and skin mill are used on the technology.