How often is it appropriate for the corn mill to check the wiring?

发布时间：2023-08-18 点击次数：

Corn milling machine manufacturers for the more stable production of the machine, the more can not be ignored safety precautions, every other time to check the line, found that the problem of timely maintenance. We will explain in detail today, how often to check the line is appropriate. 

　　1. Corn milling machine manufacturers often check the tightness of the drive belt. The belt is too loose will reduce the transmission efficiency and the impact on the grinding effect.

　　2. When starting the flour mill, please check the gas circuit, gas pressure and pressure.

　　3. Corn milling machine using manufacturers should often check the temperature of the bearings. If the temperature is too high, please find the reason and take corresponding measures in time.

　　4. Check the circuit in time, once every six months, according to the appropriate temperature selected

　　5. Corn milling machine using manufacturers regularly and orderly replacement of roller mill, also can not replace the rollers a lot of once. The taper and precision of each smoothing roller meets the specified requirements, and the surface roughness is uniform. When replacing the grinding roller, please adjust the rolling distance with a plug ruler according to the required system.

　　6. All kinds of transmission parts must be fixed reliably, and special tools must be used for dismantling or installing, and it is forbidden to use hammers and other tools to knock directly.