Not meeting production standards and how to specifically improve

发布时间：2023-02-22 点击次数：

Some manufacturers because of the impact of objective conditions lead to their own corn flour processing machinery production effect does not meet the standard, so the need for timely adjustment to meet market demand in order to gain revenue. But specifically how should improve the production effect of substandard corn flour processing machinery it                  

　　1, the requirements of corn flour processing machinery materials must be evenly spread on the sieve surface. If the requirements are not met, first calibrate the horizontal level of the sieve body; then adjust the incoming live door, live door opening in principle should be consistent, according to how much material is distributed on the width of the sieve surface to adjust, more open smaller, less out larger. Into the machine material must cover the full length of the sieve surface, such as has the condition 2, can the full length of coverage and sieve configuration, wind power size related.

　　2, corn flour processing machinery wind did not meet the requirements. The possible consequences are the feed flow of corn flour processing machinery is too small and a section of the screen is too thin. Coarse wheat residue must cover the full length of the sieve surface; fine wheat residue and coarse wheat heart such as in the tail section of the sieve surface 1/2 can not cover is common, can close the corresponding small air valve. If the full length of the sieve surface has been covered and too many things on the screen, check the screen, often to increase the screen tension, to restore the normal screen cleaning effect; or put a thin section of the screen; or appropriate to reduce the flow.