Focus on sieve body deviation phenomenon

发布时间：2022-11-28 点击次数：

The deviation of the sieve body of the corn grits processing equipment should be taken into account by the operator! In the production of corn grits processing equipment, there are strict requirements for the installation and configuration of the sieve body, otherwise the quality of the finished product will be reduced. But there are times when the sieve body of the corn grits processing equipment is more prone to deviation, how should we avoid it?

When the problem of material deviation occurs, often in the powder clearing link, not to be solved, resulting in the material continues to deviate, then the material classification will be destroyed, the effect of powder clearing decline. So the staff should pay attention to it, and stop the machine in time when abnormalities are found.

   The cause of the material deviation of the machinery may be the machinery itself screen body is not flat, then the operator needs to re-pad the leveling frame, to adjust. It is also possible that the rubber spring axial stiffness is not consistent, the compression amount is different, the operator needs to replace the rubber spring selected by the force. The sieve body movement trajectory is found to be incorrect, but also pay attention to the different excitation force of each of the two motors, adjust the bias block of one of them, so that the two are the same.