Notes on the use of polishing machines

发布时间：2022-11-09 点击次数：

Corn processing equipment dehulling and polishing machine is a use of processing machinery that can effectively help us produce easy to achieve the separation of grains and hulls of rice, wheat, soybeans, buckwheat and other agricultural products. In obtaining the separation effect of different products such as buckwheat hulls at the same time should also pay attention to the relevant taboo matters.

　　A contraindication to poor storage. When the annual summer and autumn grain harvest is over, corn processing equipment peeling polishing machine is no longer used, the equipment should be fully scrubbed and placed in indoor storage, not thrown in the ground, the field, left to the wind and rain, so that the machine rust, damage, leaving unsafe hidden dangers.

　　Two do not use before the overhaul. In the summer and autumn grain harvest before, need to strip polishing machine for serious inspection, repair, check whether the bolt is loose, whether the striker is intact, transmission parts, etc. whether there are problems. Find out the unsafe factors and to exclude, do not "sick" operation.

　　Three avoid overload work. Whether with electric motors or diesel engines for power, work can not be overloaded, otherwise it is very unsafe, but also not easy to harvest and other due to the efficiency of the work.

　　Four avoid arbitrary movement and installation. Corn processing equipment peeling and polishing machine and its power machine to move and install, are required by skilled professional and technical personnel to operate, not to do it yourself. When moving the electric threshing machine, you must first turn off the power, insulated wires must not be dragged on the ground.