What affects the production quality of corn processing equipment

发布时间：2022-10-07 点击次数：

There are many factors that affect the production quality of automatic corn processing equipment is not up to standard, such as the good or bad equipment, the quality of raw grain, operating practices, etc. will affect the production of corn, through the step-by-step investigation to find out which step is the problem, the following small part on how to solve the problem of substandard corn quality for a detailed introduction.

　　1, the capacity of the grinding material, corn by grinding, due to the endosperm is dangling scraped down, with the number of leather grinding channel after the push, the capacity of the material is reduced, the automatic corn processing equipment unit flow is also reduced.

　　2, corn moisture content is too high will cause the production of corn yield reduction;

　　3, the degree of rupture and destruction of the material, the operation of automatic corn processing equipment, with the reduction of the rolling distance grinding regional length will increase, when the fast roller on the material to increase the number of teeth to increase the degree of rupture and destruction, but the unit flow of equipment correspondingly reduced.

　　4, into the same grinding system in the uniformity of the material particles, when entering the same grinding system, the particle size of the material particles are very different, the small particles will not be grinding dip, so that the yield of corn will be reduced.

　　5, the height of the grinding teeth, in the grinding process, with the grinding teeth of the vertical wear, grinding teeth will not be easy to grab the material, and the sliding on the surface of the grinding roller increased, that is, the material in the grinding area of the mobile speed is reduced, and due to the reduction in the height of the grinding teeth, the material in the gap between the two grinding teeth reduced, so that the output of automatic corn processing equipment reduced.