Matters needing attention when disassembling corn grain equipment

发布时间：2022-09-30 点击次数：

The disassembly of corn grain equipment is often faced in daily maintenance work. Due to the complex structure of the equipment and many accessories, it requires the staff to be careful in the process of disassembly to avoid the opposite. How to disassemble corn processing equipment, we summarize the following points.

1. Before disassembly, it should be noted that if any dirt or oil stains are found on the equipment parts, it should be cleaned first to ensure that the disassembly process is clean.

2. When disassembling the corn grain processing equipment, appropriate tools should be selected, and parts should not be violently beaten, so as not to cause deformation of parts and affect life.

3. Disassemble in a reasonable order. The general principle is from accessories to main parts, from outside to inside, from the whole machine to the assembly, from the assembly to the components, and then from the components to the parts.

4. Mark the parts of the disassembled corn processing equipment, which can not only avoid the loss or damage of parts, but also improve the efficiency of assembly.

5. If any parts are found to be seriously worn during the disassembly process, they should be repaired or replaced in time.