• Contacts:Milo Wang
  • Tel:+86 400 6662589
  • E-mail:1714716253@qq.com
  • Fax:+86 530 3368803
News

What factors cause corn processing equipment to not grind through

发布时间:2022-07-22 点击次数:

In the production of corn processing machinery, the staff need to pay attention to detecting the specific processing situation, and the experienced staff can adjust the production in time according to the production situation, so as to improve the production quality and obtain higher profits. And many times, it will be found that the corn processing machinery is not fully ground. What is the reason for this?

The operating speed of the corn processing machinery is within a certain range. If in order to increase the processing volume, if the grinding speed is kept constant, the feeding speed may be forcibly accelerated, which may occur due to excessive feeding. The grinding is not transparent and blocked, and the corn processing machinery does not operate. When the grinding is not complete, the grinding effect will be greatly reduced, resulting in poor quality of corn products. In production, attention should be paid to the addition speed of materials, and try to avoid the phenomenon of impermeability of grinding.

After all, in the production process of corn processing machinery, if the feeding speed is too fast, it will cause clogging problems, but there is no great research on the processing accuracy and feeding speed. The feeding speed is fast, and the phenomenon of impermeability of grinding may occur, which affects the processing efficiency and processing quality. The rough-processed products are unqualified, resulting in a decrease in the processing accuracy of corn, which requires regrinding.


Versatile corn peeling machine|Beans dry way peeling machine|Corn peeling & grit milling plant|Flour milling machine|Flour milling plant|Cleaning machine|Flat milling machine|SiteMap