Wheat grinder "small fault" solution

发布时间：2022-06-08 点击次数：

1. Check whether all the fasteners of the equipment are fastened, and then check whether the transmission belt is installed correctly and in good condition. If the belt is damaged, it should be replaced immediately. When there is oil on the belt and sheave, you can wipe it off with a clean rag in time. Clean up the materials and other impurities in the crushing cavity in time to prevent jamming. In addition, it is necessary to check whether the protective device is in good condition. Once the protective device is found to be unsafe, it must be eliminated immediately to avoid safety accidents.

2. If it does not start and cannot be powered on normally, you should first consider whether the power supply of the wheat grinder has fallen off or broken. If this is not the case, you can plug in the power to test the machine. If the motor of the wheat grinder does not roll after it is powered on, but the wheel can be rolled by lightly turning the wheel by hand, it should be basically concluded that one of the two starting capacitors of the wheat grinder has failed. At this time, it should be replaced with a new one. There is also a possibility that the power does not roll, and the external force can be applied to roll, but there is a small current sound in the motor, which is generally caused by the leakage of the starting capacitor; if the current sound is very loud, the motor cannot be started. It may be that the capacitor is short-circuited, and at this time, professional personnel are required to repair it.