How to clean the grinder correctly

发布时间：2022-05-25 点击次数：

Under normal circumstances, the pulverizer cannot be washed as a whole, and there is also a non-washable mark in the instruction manual, because the pulverizer is an electrical appliance after all, and washing it with water may cause a short circuit; however, the motor part of the pulverizer can be separated from the grinding chamber. Yes, the crushing chamber can be disassembled and cleaned with water. If there is not much residual material, just brush it off with a brush.

When using a small pulverizer, sometimes just after pulverizing soybeans, it is necessary to pulverize rice, and the two cannot be mixed together, so they need to be cleaned before use, so how to clean a household pulverizer?

1. Before cleaning, use a brush to brush off the residual materials in the crushing chamber.

2. Then remove the machine room of the crusher, and the crushing of the items is carried out in the crushing chamber, so it is the key cleaning part; the crushing chamber is usually fixed by the cutter head and the motor. When disassembling, use a wrench to tighten the screws on the cutter head. Unscrew, remove the blade, and unplug the link cable to separate the nacelle from the motor.

3. After dismantling the crushing chamber, put the motor in place, clean the crushing chamber with clean water, and brush it once or twice with a special cleaning brush; note that other cleaning agents are generally not used, and a small amount of detergent can be used if it is dirty.

4. After cleaning, wipe the inside and outside of the crushing chamber with a dry clean rag, and then reinstall it.