Factors affecting the effect of corn

发布时间：2020-10-31 点击次数：

The quality of raw materials affects the control of the strength of the corn blower. When the quality of the raw materials is poor, the intensity of the blow should be appropriately reduced, otherwise too much crushed corn will result in a decline in the product yield and product quality. Before the corn is wetted, it is only suitable for light beating. If the blow is too heavy, the broken corn will increase and the corn may be knocked down. The embryo affects the water absorption of the corn after the water is impinged. After the water is impinged, the heavy beating should be implemented to clean the surface of the raw grain as much as possible and fully realize the comprehensive effect of beating the corn.

The working line speed of the boarding and the size of the working gap are the main factors that affect the equipment's hitting effect. In order to achieve a better corn hitting effect, the relevant parameters should be correctly selected according to the process requirements.

When the corn beater is used for light hitting or heavy hitting, a lower or higher working speed should be selected within the applicable speed range.

The working flow of the corn machine should generally not exceed the design output of the equipment. Excessive working flow will cause the equipment to block, excessive wear and tear, and it will also lead to the reduction of the efficiency of the corn.

 For more knowledge, please continue to pay attention：www.lucaohightech.com.