Rice milling machine

发布时间：2020-10-08 点击次数：

The process of cleaning the corn surface by milling is called rice milling. In the process of milling the corn surface, the rice milling equipment can more thoroughly grind the impurities on the surface of the corn, and can also grind part of the corn. The skin layer is very good for improving the purity of the milled corn.

During the operation, the following issues should be noted:

One. Before starting the machine, check whether the material in the machine is empty. It is difficult to start when the machine is full of materials.

Two. Start the machine and wait for the equipment to operate normally before feeding, and gradually increase the pressure of the pressure gate to the normal value.

Install the ammeter of the equipment in a place that is convenient for observation, check the load of the equipment at any time during the operation of the equipment and adjust the pressure door of the rice mill accordingly, and correct the incoming flow if necessary.

Three. When the machine is shut down, the machine can be shut down only after the materials in standby are empty.

 For more knowledge, please continue to pay attention：www.lucaohightech.com.