Operation and maintenance of stone removal machine

发布时间：2020-05-06 点击次数：

Check whether the damper is closed before starting the machine, and check whether the inlet and outlet and the screen surface are normal.

The start-up procedure is to start the fan first, then start the stone removal machine, and then start feeding. When the material covers most of the sieve surface, gradually open the large air door to make the material on the sieve slightly boiled, and the corn kernels begin to flow downwards; The reverse air flow makes the material form obvious corn and stone boundaries along the stone area on the screen surface and the stone is discharged normally.

During the operation of the equipment, the movement status of the materials on the sieve, the condition of stone discharge, the content of food in the food and the static pressure in the machine should be constantly checked. If the incoming material is in the middle and production is required within a short period of time, the vibration of the screen body should be stopped accordingly to prevent the material on the screen surface from emptying.

There are many factors that affect the work of the stone removal machine, so such equipment needs to be carefully maintained, checked frequently, and the various working parameters of the equipment during normal operation are recorded for analysis and problem solving.

The screen surface and suction duct should be thoroughly cleaned once a week, and the sealed state of the equipment should be carefully checked; the wearing parts of the vibration mechanism should be regularly checked and maintained; the tightness of the screen surface should be checked regularly.